Dissolution and Passivation of Chalcopyrite during Bioleaching by Acidithiobacillus ferrivorans at Low Temperature

Our knowledge on the dissolution and passivation mechanisms of chalcopyrite during bioleaching at low temperature has been limited to date. In this study, an Acidithiobacillus ferrivorans strain with high tolerance to heavy metals and UV radiation was used for chalcopyrite bioleaching. At 6 °C, no apparent precipitate was detected on the mineral surface after bioleaching using a scanning electron microscope (SEM). X-ray diffraction (XRD) revealed that the ore residue contained only chalcopyrite and quartz. X-ray photoelectron spectroscopy (XPS) analysis revealed that the content of S⁰ on the mineral surface remained low and the ratio of SO₄²⁻ decreased from 46.7% to 20.9%, but the amount of S_n²⁻ increased from 10.4% to 21.4% after bioleaching. Expression of five critical iron- and sulfur-oxidation genes during bioleaching was analyzed using quantitative real-time PCR. The gene rusA had higher expression in the mid-log phase than in the stationary phase but hdrA and cyoC1 showed an opposite trend. All genes had higher expression at 6 °C than at 28 °C, so as to compensate for the decline in the enzyme activities. The study revealed that polysulfide was the most plausible passivating substance at 6 °C, and the strain can maintain the iron- and sulfur-oxidation activities during low-temperature bioleaching. View Full-Text